Customer Service

How Can We Help You?

We accept Visa, Mastercard, EFTPOS and direct deposit. A deposit of 50% of the total order value is required to place an order, with the balance due within 14 days of your goods arriving at our warehouse.

Delayed delivery or collection will incur a storage fee, charged at a rate based on the volume of the order.

Goods remain the property of Ultimo Interiors until full payment has been made.

All prices are in Australian dollars and include GST. Full details are in our Terms and Conditions.

Freight and installation charges are calculated and quoted for every delivery, based on the size of the order and the time required to assemble and install. Some orders are delivered by a two or four person crew, for safety and to make sure you receive the best possible service.

Darkhorse Group is our preferred delivery and installation team. They are fully trained and experienced, and offer a white glove premium service.

Our logistics team will contact you to arrange delivery once your goods are ready. Please make sure someone aged 18 or over can receive the goods, and that we can get them to where they need to go (doors, lifts, stairs and hallways). Collection from the showroom is available by arrangement, Tuesday to Friday, 9am to 5pm.

  • Delivery dates and times are estimates only, and are not guaranteed unless we confirm them in writing.
  • Please give us complete and accurate delivery information, and tell us about any access restrictions before delivery. These include stairs, lifts, narrow passages, entries, restricted parking, building or strata requirements and any need for special equipment.
  • You are responsible for making sure the goods will fit through all access points and into the intended location. All relevant measurements are checked before delivery. Ultimo does not accept responsibility for goods that cannot be delivered or installed because of inadequate access or insufficient measurements.
  • Additional costs reasonably incurred because of undisclosed access restrictions, inaccurate information or inadequate access may be charged to you. These can include waiting time, additional labour, crane hire, product modification, return transport, redelivery and storage charges.
  • You or an authorised adult representative must be present at the delivery address to receive and accept the goods.
  • If a delivery cannot be completed because no authorised recipient is present, because of restricted access or because of circumstances beyond our reasonable control, additional charges for redelivery and associated costs may apply.
  • Risk in the goods passes to you on delivery to the nominated address. If you arrange your own carrier or collect the goods from our premises, risk passes on collection.
  • Delayed delivery or collection will incur a storage fee, charged at a rate based on the volume of the order.

Change of mind and incorrect selection
We do not offer refunds if you change your mind, choose incorrectly or no longer need the product.

Inspecting your delivery
We recommend inspecting items as soon as they are delivered, to make sure you are satisfied with them, including their quality and whether they match the description we provided. If you collect items from our showroom or warehouse, we recommend inspecting them before you leave.

Change-of-mind returns require written approval from Ultimo management. Ultimo reserves the right to charge a restocking and handling fee of 20% of the recommended retail price (RRP) of returned items.

If an item arrives faulty or does not match its description, contact us promptly at info@ultimo.com.au or on (08) 9201 2479. Your rights under the Australian Consumer Law always apply, and we will repair, replace or refund as the law requires.

Our furniture is designed and crafted by leading European houses, with many pieces made to order. Natural variations in timber, leather, stone and fabric contribute to each piece’s character.

We take reasonable care to provide accurate product descriptions, dimensions, images, colours and specifications. Images are for illustration only, and appearance may vary with lighting, screen settings and photography.

Furniture made from timber, veneer, stone, marble, leather, fabric, metal, glass or other natural or handmade materials may vary in colour, grain, veining, texture, markings, patina, shade, stitching, dimensions and finish. These inherent characteristics are not faults unless the product fails to meet a consumer guarantee.

Delivered products may differ slightly from samples or display pieces, including variations between dye lots, leather hides, stone slabs and timber batches.

Unless expressly stated otherwise, dimensions are approximate. You are responsible for making sure products suit their intended location, and that access is sufficient for delivery and installation.

Sofa cushions

Ultimo sofas use the highest quality European and Australian materials. Some cushions contain down and a high-density polyurethane core. Feather channels, like those in a quilt, may show through fabric or leather, and this is normal. Cushions mould to the user, developing a relaxed, lived-in appearance.

  • Plump daily-use cushions at least weekly. Pat all sides vigorously to separate and redistribute the feathers and introduce air, restoring a domed shape.
  • Rotate and turn cushions on the same schedule to distribute foam wear and extend their life.

Fabric

Vacuum regularly to remove dust, dirt and debris. Most upholstery fabrics can be dry-cleaned, but consult Ultimo Interiors before washing or professional cleaning, as instructions vary by fabric. Dab stains to absorb them without rubbing or spreading them, and contact our showroom for advice. Avoid prolonged direct sunlight, which fades and weakens fabric.

Leather

Remove dust and debris with a damp cloth. For leather other than aniline, moisturise with a leather care kit, available from Ultimo. Contact the showroom for difficult stains, cleaning advice or professional upholstery and leather cleaning.

  • Keep all leather away from direct sunlight, heaters, fireplaces and damp conditions. Sunlight can cause fading and excessive drying.
  • Dust regularly with a dry cloth or soft-brush vacuum. Clean contact areas regularly to remove perspiration and body and hair oils.
  • Remove spills immediately without scrubbing. Use only water-based leather cleaners and conditioners as directed by the manufacturer, subject to the aniline exception below.
  • Never use commercial cleaners, household detergents, solvents, lighter fluid, spot removers, turpentine, alcohol, buffing compounds, shoe creams or similar products. They can permanently damage the surface and finish. Heavy staining may need professional cleaning.

Aniline leather: direct sunlight causes rapid fading. Blot spills immediately with a soft, absorbent white or colourfast cloth to prevent permanent discolouration, and do not scrub. Use only water-based cleaners, never conditioners, as aniline leather contains its own conditioning oils. The other leather precautions above also apply.

Timber, lacquer and marble

Natural timber and lacquer finishes change with environmental conditions over time. Timber varies between pieces and showroom samples, and these natural differences make each piece unique. Marble also varies naturally in colour and veining, with slight surface irregularities, tiny pinholes and inclusions that do not affect its quality or structural integrity.

  • Clean timber, lacquer and marble with a soft cotton cloth. For marks, lightly dampen the cloth with water, then dry immediately. Remove spills and all moisture promptly, as leaving wet areas can cause severe damage. Use coasters and placemats wherever possible.
  • For stubborn timber stains, use mild soapy water, work with the grain and dry immediately. Never use commercial polish containing silicone or similar compounds, which can irreparably damage the finish.
  • Keep timber away from direct natural or artificial light, fireplaces, radiators, air conditioners and wet or humid areas, including kitchens and bathrooms, unless it is designed for those conditions.

Metal and glass

Metal components are for indoor domestic use unless specified otherwise. Avoid water, especially salt water, as high salt-air exposure may alter their appearance or structure. Never use commercial metal cleaners or polishes. Clean with a soft cotton cloth barely dampened with water, or mild soapy water for stubborn marks, and dry immediately.

  • Keep glass-cleaning chemicals off timber, lacquer and steel to prevent irreparable damage. Avoid extreme heat, including hot cups and pans, and sharp objects such as cutlery, which scratch glass.
  • Clear glass: use commercial glass cleaners on surfaces and edges.
  • Sandblasted glass: use commercial glass cleaners on surfaces and edges. For stubborn marks on the sandblasted side, first try mild detergent and water with a soft cloth, then rinse off the detergent and dry thoroughly.
  • Painted glass: use commercial glass cleaners only on unpainted surfaces. Keep chemical cleaners off painted areas, and wipe these with a soft cotton cloth barely dampened with water.

Laminate

High-pressure laminate (HPL) is a high-quality material that resists water, heat and scratches, and needs no special maintenance.

  • Remove most stains with water, then dry with a soft, clean cloth or microfibre cloth. For persistent stains, use a laminate-specific detergent. A melamine foam sponge (magic eraser) is a preferred option where available. Finish with a dry cloth to remove streaks.
  • Avoid abrasive substances, acidic or alkaline detergents, furniture polishes, wax-containing detergents, abrasive sponges, sandpaper and scouring pads.
  • Never cut or use sharp tools directly on the surface, and do not place hot pots directly on laminate, as they can cause irreparable damage.

Ceramic

Ceramic tabletops are relatively durable and withstand heat and light scratches better than marble or timber. Still, use coasters and placemats. Avoid impacts from hard objects and do not drag the table, as the ceramic may chip.

  • For daily cleaning, use a neutral or alkaline detergent, such as kitchen soap, with a soft sponge or microfibre cloth. Rinse and dry thoroughly to prevent rings from detergent or water residue.
  • Do not use abrasive cleaners. Wipe up wine, coffee, ketchup, oils and acidic substances such as vinegar immediately.

Our Terms and Conditions and Privacy Policy are available on this website.